[This site - shoes and life] basketball shoes maintenance purposes are two: First, the performance of maintenance, and second, the appearance of maintenance. The maintenance method of performance mainly lies in the correct preservation of shoes, and the appearance of maintenance is mainly reflected in the scientific cleaning of shoes, and sometimes the two are integrated.
In terms of preservation methods, due to the variety of raw materials used in basketball shoe making, for example, the materials used in a pair of basketball shoes are likely to include leather, cloth, nylon, non-dragon, non-mark rubber, and so on. Complex, there are many places glued together. It is these materials that guarantee the performance of a pair of shoes. To maintain performance lies in the proper handling of a pair of shoes so that the above-mentioned materials do not age. Therefore, the correct method of saving the write should pay attention to the following points.
Place the environment
First, the shoes should be placed in a relatively dry and ventilated place, avoid direct sunlight, because the wet environment will cause the corrosion of the shoe body, the exposure of the sun will cause some of the shoe material metamorphism and discoloration. However, the place where the shoes are placed should not be too dry, as it will cause cracks in the leather. Because of the corrosion of the shoe body caused by the moist environment, the exposure of sunlight will cause some of the shoes to be discolored. Second, when the shoe is stored, a soft ball of paper should be stuffed into the shoe. The main purpose of this is that the paper ball can absorb the residual moisture inside the shoe and keep it dry inside, and it helps to keep the shoe shape fixed. As for the use of "blow off". Third, the special need to put forward is that for the preservation of the collection type, it is best to buy some shrink film, like a shoe store inside a pair of shoes completely wrapped in order to obtain a large limit of the shoes and the air isolation, prevent a longer period of time The inner air constantly oxidizes the shoes. For example, nike's visible air cushion such as max air or Jordan's 11th generation, 16th generation outsole will gradually turn yellow in a few years. It is a good choice to use shrink film to maintain the original color.
In terms of cleaning. There should be different methods for different materials. The outer soles of the shoes and the non-dragon materials on the sides can be sprayed with a little collar net. After ten seconds, the soft toothbrushes are gently brushed. However, the brushing time should not be too long. After the brushing, the warm water or cold water should be used in time. Wash away the foam to minimize the amount of chemicals that can attack the shoe. After cleaning, dry the remaining water with a dry rag immediately. If the cleaned shoes are visible air-cushioned, clean the water around the air cushion after the above process is completed to avoid dissolving some of the glue that breaks down for a long time. Chemical changes have caused the glue to open. If possible, use a toothpick to remove the pebbles that are caught during the walk in the sole lines, because holding the foreign objects for a long time will deform the lines of the soles, affecting the braking performance of the shoes to some extent. The method of cleaning uppers depends on what the main components of the upper are. Basic cleaning method is to use a rag to dip a little water, and then gently wipe in the upper, and pay attention to whether the booties on the shoe is a "hard injury", if it is a crack in the vise, then skip there The site of injury, because if you continue to rub in the injured area will make the wound more dirty, and even cracks become larger. If the upper is a foam material similar to Nike, the PU material or patent leather adidas uses in the kobe series, it can be wiped directly with a damp cloth, which is a material that is easier to clean. And note that some parts use another kind of artificial leather similar to the anti-fur material, such as the inner dark part of the and1 taichi mid, air Jordan 7 black upper, when cleaning, we must pay attention to the degree of rag moist, general To clean up this kind of uppers, use a cloth that is too wet and dirt will become worse. However, the above method does not apply to a shoe on a cloth surface, such as a part of the upper surface of a nike air Garnett III. It can be said that this type of shoe upper has substantially no cleaning method. In addition, if possible, the shoelace should be removed from the top of the shoe for a period of time to focus on cleaning, which has a better eye-catching effect on the shape of the shoe after cleaning.
Finally, in the aspect of wearing shoes, the use of shoes in an abnormal environment is avoided as much as possible, that is, the number of uses on high temperature asphalt roads under rain, snow, and sun exposure is reduced. In situations where normal wear and tear is unavoidable, the frequency of changing shoes should be increased so that the shoes have a rest time after being used and try to return to a more "healthy" state before the next use. Once the shoes are dirty, they should be cleaned as soon as possible to avoid the deterioration of the uppers caused by the stains staying on the shoes for a long time, and cleaning them for a long time will increase the difficulty of cleaning.
In short, the maintenance of basketball shoes is a needful process.
The T-shirts & polos are our cashmere basics. Pair it with a button up jacket and cashmere wide legs for a romantic rebel look, or with jeans for easy everyday style. This irresistibly soft and cozy classic just works with every thing in your closet.
Women'S Cashmere Polos,Women'S Cashmere T-Shirts,Cashmere Fashion Polos,100% Cashmere Polos
NingXia ZhongYin Cashmere Co., Ltd. , https://www.brownallan1883.com