Analyze the glass door spring adjustment technique
[China Glass Net] Because of its more beautiful appearance, the glass door is more easily chosen by everyone when it is installed. Everyone knows a lot about the overall choice of glass doors, but do you know the details of the glass doors? Such as the glass door spring adjustment. On this issue, Xiaobian will discuss it with everyone.
The floor spring is a type of door closer, and such a door closer is used more in a glass door. The glass door spring is also a hydraulic door closer. The device for pressing the spring is a worm gear, mainly because the worm wheel can rotate in the forward and reverse directions. According to the characteristics of the glass door spring, the basic configuration is the sun shaft and the ground shaft, except for the glass. The door can be applied to almost all wooden, steel, aluminum doors and frameless glass doors with glass door clamps.
Pay attention to the tips and steps when adjusting the glass door spring. The installation accuracy of the glass door spring has a great influence on its service life. The axis connection between the sun shaft and the spring door of the glass door is not perpendicular to the ground. The movement of the door leaf will bring a great torque to the glass door spring. Increased wear between the main shaft and the bearing, resulting in oil leakage in the shaft. The glass door spring will cause the elastic force to weaken after long-term stretching exercise, and the glass door cannot be normally opened and closed.
First, mark the line so that the center of the glass door spring hinge coincides with the door clamp axis;
Then, according to the installation instructions and physical objects of the glass door spring, the hole is made on the ground, and the size of the hole should be tightly matched with the floor spring casing, and cannot be loosened;
Next, place the glass door spring into the opened hole and square it. Lifting the door leaf with the door clamp, so that the rotating shaft of the floor spring is inserted into the shaft hole of the door leaf;
Adjust the three directions of the glass door spring to keep the door vertical and the vertical axis coincide;
Later, adjust the speed of closing the glass door and cover the glass door to the spring cover.
The above is a small series of spring door adjustment techniques introduced to you today, I hope that through the introduction, we can have more understanding of the glass door spring adjustment.
Poly Fabric,Eco Poly Fabric,Recycle Polyester Fabric,100 Recycled Polyester Fabric
Shaoxing Yuantiao Imp&Exp.,Ltd. , https://www.jeesun-fabric.com