Consumers are very concerned about the quality of shoes, but they have no choice when buying shoes. The quality of the shoes is good or bad, and there are many factors such as the quality of the shoes, the quality of the manufacturing process, the structure of the shoes, the matching of the clothing, the comfort of the wearer, the function of the shoes, and other factors.
1. The quality of the shoe includes the upper and the shoe, and the authenticity of the leather should be discerned
Natural leather is the dermis, is a pore, generally difficult to see with the eyes, you can use the thumb to press the skin, to see if there is a fine striae lines next to the thumb. Fine lines, fine lines disappeared after the release of the hand, leather shoes full of good elasticity for the better natural leather, a deeper wrinkle is a poor cortical natural skin. If there are no fine lines, most of them are not natural leather, including two-layered leather. Another notable feature of natural leather is a flaw on the surface of the leather. In general, the upper of natural leather has slight blemishes on the inner side of the shoe and other inconspicuous areas, such as uneven skin thickness, bright blemishes, and blemishes. The cross section of natural leather has three levels of density: the epidermis is very fine and flexible, and the dense dermis is in the middle. The following is a relatively loose, fibrous layer, and there is no clear distinction between the layers. Leather shoes are reinforced materials used to prevent stretch deformation and improve the feel of the foot. Requires the shoe material has a fine touch, breathable, excellent moisture absorption and humidity, can not afford color and other properties. Shoes made of high-grade leather shoes are made of natural leather and Cotton. If the upper is natural leather, artificial leather is used in the shoe, which can only be regarded as middle and low shoes. Most consumers ignore the selection and identification of materials in shoes. This is wrong.
2. View the suture suture and the bottom adhesive seam, identify the quality of the processing to see if there is a broken line, the shoe suture line is neat and standard. In particular, the bonded parts of the adhesive shoes should be bonded and smooth without any gaps, and there should be no signs of false seams and gels.
3. Touch the inner cavity of your shoes with your hands to see if there is unevenness on the inside and the bottom of the shoes. Where the foot can touch the skin, it cannot be uneven. If not, the foot will blisters. There must be an insole inside the shoe. It is designed to keep the inside of the shoe clean, cover the uneven nail holes on the inner bottom, and improve the feel of the feet.
4. Hand rub the heel of the upper part of the shoe to see if it is firm and flexible. The back of the heel must not have a vestige. The underside of the ankle should be elastic and not too stiff, otherwise it will damage the ankle.
5. Press the inner bottom of the waist to see if the inner bottom of the hard shoe is the trunk and skeleton of the shoe, and press the inner bottom hard enough to keep it in place. Skeleton and torso are not stiff, shoes will inevitably be deformed and damage the foot.
6. Place the shoes on the desktop or on the glass, and check if the shoes are stable. When the shoes are placed on the table, stop shaking immediately.
7. Using the middle fingertips, insert the front pointed sole underneath to see if the height of the front ankle is appropriate. When the tip of the toe is just enough for the thickness of the middle finger, it means that the front of the toe is right. When the front of the toe tip is too large, the stability is reduced; when the forehead is too small, the soles of the shoes wear quickly, the shoes are easily deformed, and the feet are easily fatigued.
8. Hold the shoes with your hands and see if the sole and the heel contact are stable. Place the sole and heel lightly on the sides of the table (or counter) so that the side of the shoe is facing upwards and check the contact area of ​​the sole. It is better to contact the side of the table with the sole (the widest part of the sole) and the entire heel plane. Otherwise the shoes are easily deformed and the heel is dropped.
9. Place the shoe on the table top and check whether it is straight from the front of the toe to the front or back. Look at the inner and outer edges of the sole from the top of the table. The difference should be small. It is better to keep the balance. From the heel of the shoe to the front, check whether the heel of the shoe is up and down vertically, so as not to incline to the inside or outside.
10. Use the index finger to stand on the outside of the back side of the shallow shoes. Look at the inner bottom of the upper side of the upper forearm with the tip of your index finger facing down, and place your index finger near the upper of the outer collar to see the second finger line of the index finger. The uppers are of the same height. General life shoes, social etiquette shoes, and fashion shoes are slightly lower than the second finger line of the index finger; low-rise sports shoes and casual shoes have a soft mouth structure at the back, and the height of the outside can be slightly higher. In the second finger line of the index finger.
11. Looking down from the top to the top, check the symmetry of the shoe part and whether the shoe mouth is deformed so that the line between the toe and the midpoint of the heel is the axis of symmetry. See if the parts on the upper are symmetrical or not. Symmetrical symmetry does not move forward and backward. The contours of the shoe's mouth should be folded toward the inside of the shoe, and the smooth and round ones should be good; the shoes that are distorted into lotus leaf shape should be inferior shoes.
12. To understand the performance of the outsole of the shoe, choose a suitable outsole with a variety of outsole, according to the main raw materials can be divided into a variety of rubber bottom, imitation leather, plastic bottom, etc., their respective properties are: rubber sole with Soft, elastic, non-slip, wear-resistant, good heat and cold resistance. Only a little heavier texture. Imitation leather sole, lightweight, stiff, wear-resistant, resistant to twists and turns. However, it is less flexible and less slippery. Plastic soles, good wear resistance and elasticity. However, the texture is hard and the heat and cold resistance are poor.
Upholstery Fabric,Concrete Canvas,Cotton Duck Canvas Fabric,Cotton Fabric
Fenghua Shuangdun Textile Canvas Industrial Co., Ltd. , http://www.sduntextile.com